All

SCPI Commands :

SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:OLD
SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:CONTinue
SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:WAVeform
SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL

class AllCls

All commands group definition. 7 total commands, 3 Subgroups, 4 group commands

continue_py() → None

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:CONTinue
driver.source.gprf.generator.sequencer.listPy.signal.all.continue_py()

No command help available

continue_py_with_opc(opc_timeout_ms: int = -1) → None

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:CONTinue
driver.source.gprf.generator.sequencer.listPy.signal.all.continue_py_with_opc()

No command help available

Same as continue_py, but waits for the operation to complete before continuing further. Use the RsCMPX_Gprf.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.

get_old() → List[str]

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:OLD
value: List[str] = driver.source.gprf.generator.sequencer.listPy.signal.all.get_old()

No command help available

return:

signal: No help available

get_value() → List[str]

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL
value: List[str] = driver.source.gprf.generator.sequencer.listPy.signal.all.get_value()

Defines the signal types for all sequencer list entries. A complete list of all supported strings can be queried using method RsCMPX_Gprf.Source.Gprf.Generator.Sequencer.ListPy.Signal.Catalog.value.

return:

signal: Comma-separated list of strings, one string per list entry

set_old(signal: List[str]) → None

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:OLD
driver.source.gprf.generator.sequencer.listPy.signal.all.set_old(signal = ['abc1', 'abc2', 'abc3'])

No command help available

param signal:

No help available

set_value(signal: List[str]) → None

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL
driver.source.gprf.generator.sequencer.listPy.signal.all.set_value(signal = ['abc1', 'abc2', 'abc3'])

Defines the signal types for all sequencer list entries. A complete list of all supported strings can be queried using method RsCMPX_Gprf.Source.Gprf.Generator.Sequencer.ListPy.Signal.Catalog.value.

param signal:

Comma-separated list of strings, one string per list entry

set_waveform(waveform: str) → None

# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:SIGNal:ALL:WAVeform
driver.source.gprf.generator.sequencer.listPy.signal.all.set_waveform(waveform = 'abc')

No command help available

param waveform:

No help available

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.gprf.generator.sequencer.listPy.signal.all.clone()

Subgroups

• Cw
• Dtone
• Off