Lincrement

SCPI Commands :

SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement
SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement:ALL
class LincrementCls[source]

Lincrement commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get(index: int) → ListIncrement[source]
# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement
value: enums.ListIncrement = driver.source.gprf.generator.sequencer.listPy.lincrement.get(index = 1)

Defines or queries the list increment for the sequencer list entry with the selected <Index>.

param index:

No help available

return:

list_increment: - DTIMe: The dwell time is defined via SOURce:GPRF:GENi:SEQuencer:LIST:DTIMe. - ACYCles: The ARB cycles are defined via SOURce:GPRF:GENi:SEQuencer:LIST:ACYCles. - USER: A user action is triggered via TRIGger:GPRF:GENi:SEQuencer:MANual:EXECute. - MEASurement: The measurement source is selected via TRIGger:GPRF:GENi:SEQuencer:ISMeas:SOURce. - TRIGger: The trigger source is selected via TRIGger:GPRF:GENi:SEQuencer:ISTRigger:SOURce.

get_all() → List[ListIncrement][source]
# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement:ALL
value: List[enums.ListIncrement] = driver.source.gprf.generator.sequencer.listPy.lincrement.get_all()

Defines the list increments for all sequencer list entries.

return:

list_increment: Comma-separated list of values, one value per list entry - DTIMe: The dwell time is defined via SOURce:GPRF:GENi:SEQuencer:LIST:DTIMe:ALL. - ACYCles: The ARB cycles are defined via SOURce:GPRF:GENi:SEQuencer:LIST:ACYCles:ALL. - USER: A user action is triggered via TRIGger:GPRF:GENi:SEQuencer:MANual:EXECute. - MEASurement: The measurement source is selected via TRIGger:GPRF:GENi:SEQuencer:ISMeas:SOURce. - TRIGger: The trigger source is selected via TRIGger:GPRF:GENi:SEQuencer:ISTRigger:SOURce.

set(index: int, list_increment: ListIncrement) → None[source]
# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement
driver.source.gprf.generator.sequencer.listPy.lincrement.set(index = 1, list_increment = enums.ListIncrement.ACYCles)

Defines or queries the list increment for the sequencer list entry with the selected <Index>.

param index:

No help available

param list_increment:

  • DTIMe: The dwell time is defined via SOURce:GPRF:GENi:SEQuencer:LIST:DTIMe.

  • ACYCles: The ARB cycles are defined via SOURce:GPRF:GENi:SEQuencer:LIST:ACYCles.

  • USER: A user action is triggered via TRIGger:GPRF:GENi:SEQuencer:MANual:EXECute.

  • MEASurement: The measurement source is selected via TRIGger:GPRF:GENi:SEQuencer:ISMeas:SOURce.

  • TRIGger: The trigger source is selected via TRIGger:GPRF:GENi:SEQuencer:ISTRigger:SOURce.

set_all(list_increment: List[ListIncrement]) → None[source]
# SCPI: SOURce:GPRF:GENerator<Instance>:SEQuencer:LIST:LINCrement:ALL
driver.source.gprf.generator.sequencer.listPy.lincrement.set_all(list_increment = [ListIncrement.ACYCles, ListIncrement.USER])

Defines the list increments for all sequencer list entries.

param list_increment:

Comma-separated list of values, one value per list entry - DTIMe: The dwell time is defined via SOURce:GPRF:GENi:SEQuencer:LIST:DTIMe:ALL. - ACYCles: The ARB cycles are defined via SOURce:GPRF:GENi:SEQuencer:LIST:ACYCles:ALL. - USER: A user action is triggered via TRIGger:GPRF:GENi:SEQuencer:MANual:EXECute. - MEASurement: The measurement source is selected via TRIGger:GPRF:GENi:SEQuencer:ISMeas:SOURce. - TRIGger: The trigger source is selected via TRIGger:GPRF:GENi:SEQuencer:ISTRigger:SOURce.