Nrpm
SCPI Commands :
CONFigure:GPRF:MEASurement<Instance>:NRPM:SCOunt
CONFigure:GPRF:MEASurement<Instance>:NRPM:REPetition
CONFigure:GPRF:MEASurement<Instance>:NRPM:TOUT
- class NrpmCls[source]
Nrpm commands group definition. 4 total commands, 1 Subgroups, 3 group commands
- get_repetition() Repeat [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:REPetition value: enums.Repeat = driver.configure.gprf.measurement.nrpm.get_repetition()
Specifies the repetition mode of the measurement. The repetition mode specifies whether the measurement is stopped after a single shot or repeated continuously. Use CONFigure:..:MEAS<i>:…:SCOunt to determine the number of measurement intervals per single shot.
- return:
repetition: SINGleshot: single-shot measurement CONTinuous: continuous measurement
- get_scount() int [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:SCOunt value: int = driver.configure.gprf.measurement.nrpm.get_scount()
Specifies the statistic count of the measurement. The statistic count is equal to the number of measurement intervals per single shot.
- return:
statistic_count: Number of measurement intervals
- get_timeout() float [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:TOUT value: float = driver.configure.gprf.measurement.nrpm.get_timeout()
Defines a timeout for the measurement. The timer is started when the measurement is initiated via a READ or INIT command. It is not started if the measurement is initiated manually. When the measurement has completed the first measurement cycle (first single shot) , the statistical depth is reached and the timer is reset. If the first measurement cycle has not been completed when the timer expires, the measurement is stopped. The measurement state changes to RDY. The reliability indicator is set to 1, indicating that a measurement timeout occurred. Still running READ, FETCh or CALCulate commands are completed, returning the available results. At least for some results, there are no values at all or the statistical depth has not been reached. A timeout of 0 s corresponds to an infinite measurement timeout.
- return:
tcd_timeout: No help available
- set_repetition(repetition: Repeat) None [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:REPetition driver.configure.gprf.measurement.nrpm.set_repetition(repetition = enums.Repeat.CONTinuous)
Specifies the repetition mode of the measurement. The repetition mode specifies whether the measurement is stopped after a single shot or repeated continuously. Use CONFigure:..:MEAS<i>:…:SCOunt to determine the number of measurement intervals per single shot.
- param repetition:
SINGleshot: single-shot measurement CONTinuous: continuous measurement
- set_scount(statistic_count: int) None [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:SCOunt driver.configure.gprf.measurement.nrpm.set_scount(statistic_count = 1)
Specifies the statistic count of the measurement. The statistic count is equal to the number of measurement intervals per single shot.
- param statistic_count:
Number of measurement intervals
- set_timeout(tcd_timeout: float) None [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:NRPM:TOUT driver.configure.gprf.measurement.nrpm.set_timeout(tcd_timeout = 1.0)
Defines a timeout for the measurement. The timer is started when the measurement is initiated via a READ or INIT command. It is not started if the measurement is initiated manually. When the measurement has completed the first measurement cycle (first single shot) , the statistical depth is reached and the timer is reset. If the first measurement cycle has not been completed when the timer expires, the measurement is stopped. The measurement state changes to RDY. The reliability indicator is set to 1, indicating that a measurement timeout occurred. Still running READ, FETCh or CALCulate commands are completed, returning the available results. At least for some results, there are no values at all or the statistical depth has not been reached. A timeout of 0 s corresponds to an infinite measurement timeout.
- param tcd_timeout:
No help available
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.gprf.measurement.nrpm.clone()
Subgroups